Lighting, Switches & Outlets (Labor Only)

Important Note on Volume: In 2026, electrical labor pricing is heavily driven by Quantity. The unit prices below are lower for projects with multiple points (e.g., 10+ pot-lights) and higher for small service calls (1-3 units) due to setup and travel time.

1. LED Pot-lights (Recessed Lighting)

Installing pot-lights requires precision to avoid joists and maintain vapor barriers. Prices are per Individual Light.

• Below Market ($50 – $75/light): “The High-Volume Project.” Reserved for whole-home renovations or large rooms (15+ lights) with open or easy ceiling access. Covers standard wiring and unit placement.
• Market Range ($75 – $135/light): “The Professional Standard.” The benchmark for GTA living rooms and kitchens. Includes laser-aligned layouts, clean hole cutting through finished drywall, and wiring to code without unnecessary damage to your interior.
• Above Market ($135 – $220+/light): “Complex & High-Access.” For ceilings over 12ft, outdoor soffit lighting, or heavily insulated attic ceilings requiring air-tight “seal-box” installations.

2. Light Fixtures (Chandeliers, Pendants, Sconces)

From a bedroom light swap to a grand foyer chandelier, labor depends on weight and height. Prices are per Fixture.

• Below Market ($75 – $145/fixture): “The Straight Swap.” Replacing an existing fixture with a new one using the current electrical box. No new wiring or structural support needed.
• Market Range ($145 – $340/fixture): “The Master Install.” Required for heavy chandeliers, multi-pendant kitchen islands, or wall sconces that need new wiring runs. Includes reinforcing ceiling boxes for safety and precise height calibration.
• Above Market ($340 – $770+/fixture): “Luxury & Large Scale.” For massive fixtures (100lb+) in high-ceiling areas like stairwells or entries. Often requires scaffolding and a two-man crew for safe lifting and securing.

3. Switches, Dimmers & Receptacles (Outlets)

Modernizing your home’s touchpoints—moving to smart dimmers or adding high-speed USB outlets. Prices are per Device.

• Below Market ($15 – $30/device): “The Mass Swap.” One-for-one replacement of existing devices (Decora style). This rate is only applicable when doing a large quantity (whole floor or house).
• Market Range ($30 – $75/device): “Modern Device Upgrade.” Professional installation of modern dimmers, multi-way switches, or specialty receptacles (USB-C/GFCI). Ensures all connections are tight and plates are perfectly level.
• Above Market ($75 – $140+/device): “New Line & Specialty.” Required for installing an outlet in a new location that requires a dedicated cable run back to the panel or AFCI safety outlets for bedrooms.

---

Expert Insight: In 2026, hiring an electrician for a single pot-light can cost as much as doing five. Market Range labor becomes significantly more cost-effective when you consolidate your lighting, outlet, and switch upgrades into one single visit.