Plumbing Fixtures: Kitchen & Bath (Labor Only)

In 2026, professional plumbing installation is your primary insurance against water damage. These Labor-Only rates cover the expert mounting and connection of your selected fixtures. Prices are per Unit/Fixture.

1. Kitchen & Bathroom Faucets & Sinks

From a simple vanity tap to a professional-grade kitchen workstation, the labor reflects the complexity of the water and drainage connections.

• Below Market ($130 – $200/unit): Ideal for replacing an existing faucet with a new one in the same location. This rate assumes all shut-off valves and drains are in good working condition and do not require modification.
• Market Range ($200 – $400/unit): The industry benchmark for renovations. Includes mounting an undermount or drop-in sink, sealing it properly to the countertop, and installing a new P-trap/drain assembly.
• Above Market ($400 – $700+/unit): For complex installations like floor-mounted tub fillers, pot fillers over the stove, or luxury touchless faucets requiring internal battery or electrical packs.

2. Toilet Installation

A proper seal is the most critical part of a toilet installation to prevent slow leaks and subfloor rot.

• Below Market ($160 – $240/unit): Replacing a common two-piece toilet with a new one. This includes a new wax ring and connection to the existing water line.
• Market Range ($240 – $490/unit): The standard for one-piece or “skirted” toilets, which are heavier and require much more precision. Includes the replacement of the old shut-off valve with a high-quality quarter-turn valve for safety.
• Above Market ($490 – $900+/unit): Specialized labor for wall-hung toilets (requiring an in-wall carrier system) or smart toilets (Bidet-style) that require both water and electrical integration.

3. Shower & Bathtub Systems

Working behind the walls requires specialized skill to ensure your mixing valves are set to the correct depth and are 100% leak-proof.

• Below Market ($230 – $480/unit): Changing only the visible handles and showerheads without replacing the valve inside the wall. A fast aesthetic refresh.
• Market Range ($480 – $1,100/unit): Replacing the internal mixing valve (requires wall access), the shower arm, and the tub spout. This is the professional standard during any full bathroom remodel to ensure long-term durability.
• Above Market ($1,100 – $3,000+/unit): Complex installations involving multi-jet body sprays, steam shower generators, or high-flow rain systems with independent thermostatic controls.

---

Expert Insight: In 2026, most fixture failures are caused by old, corroded shut-off valves. Market Range labor always includes a recommendation to replace these small components, preventing a catastrophic leak that could cost thousands in flooring repairs later.